Thank you VP6D team!

Posted on November 1, 2018 by robert

I have to admit that hunting for VP6D felt like hunting real DX, a feeling that is pretty rare down here at the bottom of the solar cycle.  I had fun working them on 8 CW bands from 80-10m, plus SSB and FT8.  This isn’t the first time I’ve worked a team sailing on the Braveheart, and like those earlier events it was populated with excellent operators (14 of them), great pilot stations (8 of those).  Dave, K3EL, does an excellent job leading things as always.  Hard to imagine that they finished with 121,136 QSOs.  Even harder to imagine is that there were almost as many digital contacts (mostly FT8) as SSB contacts.  But of course CW continues to shine.  (56% CW, 24% SSB, 20% Digital)

My hat’s off to all the Ops, Pilot Stations, and the crew of the Braveheart for  another fantastic DXpedition.  I anxiously await all the behind the scene stories sure to come out over the next few months.

Lucky Gary KB7QFE, immortalized for being the last station recorded in the DXA app to work VP6D!

Posted in DX | Leave a comment

All likely bands completed with VP6D

Posted on October 29, 2018 by Bob Beatty

This morning I picked up VP6D on 30 and 40 meter CW.  While the 30 meter contact came up on DXA quickly, the 40 meter contact took a very long time.  I had read that they were having some network issues out to the CW tent, which is a a kilometer away from the main station.  Anyway, the important thing is it showed up.  Hats off to the CW op.  I was just hearing them above the noise floor, and he caught the tail end of my call sending “SON SON SON?” several times until he dug out the whole thing.

I think folks generally feel like they accomplished something with their gear and skills.  But I know for sure the actual skill lies on the far end of the contact, with the OP dealing with pileups and fatigue.  Thank you VP6D!

Also pretty cool to see over 104K Qs in the log.  Who says you can’t have good DX at the bottom of a solar cycle.  57% CW, 26% SSB, and 17% Digital.  I suspect most of the digital contacts will be FT8.

By the way, the LotW confirmations show up quickly.  Thank you again.

Posted in DX, FT8 | Leave a comment

Sure enough – VP6D FT8 QSOs in log

Posted on October 27, 2018 by Bob Beatty

As I mentioned the other day, there appears to be an issue with the DXA.com application failing to show FT8 QSOs as they occur.  I made two the other day, and neither showed up on DXA, but they did show up in the actual log today.  Even with this minor glitch, the DXA application is a fantastic piece of work.

FT8 QSOs don’t show up on DXA

Actual logbook shows FT8 QSOs

 

Posted in DX, FT8 | Leave a comment

Success with FT8 for VP6D

Posted on October 26, 2018 by Bob Beatty

Yesterday I had four bands on CW plus a SSB contact, so I needed a Digital contact have Ducie Island on all three modes.  VP6D was on 15-meter FT8 today and I worked them around 18:38 UTC.  I hadn’t run the Fox/Hound mode, but it was easy to add 21.091 to the list of Working Frequencies under Files/Settings/Frequencies, then use the File/Settings/Advanced tab to select the FT8 DXpedition mode “Hound” box.

Watching FT8 working in Fox/Hound mode is fascinating.  The Fox will broadcast multiple signals around a 1000 Hz offset.  You can see VP6D sending six messages every time in the screen cap below (Circled area).  The hounds are all sending at any frequency they select above the Fox.  In my case I was sending at an offset of 1605 Hz.

You can see in the screen cap below that at 18:38:15 I had sent another call to “VP6D WB4SON FN41”, still on my original offset of 1605 Hz.  The next 15 second block is VP6D responding to me at 18:38:30 on offset 995 Hz. From that point on, my FT8 frequency automatically changes to that offset. and stays there until I receive my 73 at 18:40:00.  Pretty cool!

By the way, FT8 users should not panic if they don’t see their call show up int he DXA Real Time display.  VP6D folks have said there is an issue with that and to wait a day to see the calls show up in the actual log.

Posted in DX, FT8 | Leave a comment

VP6D Ducie Island

Posted on October 25, 2018 by Bob Beatty

I’ve been a bit under the weather, plus my inverted-L had blown down in a recent storm, so I haven’t had much on-air activity.  My friend Willy W1LY came over a couple of days ago and got the antenna back in the air.  I finally made it to the shack in the basement this afternoon, and started hunting for VP6D, Ducie Island, an all-time new one (ATNO) for me.

I was lucky enough to work them on 17, 15, 12, and 10 meter CW, as the signals from VK land are just booming in this afternoon.  The operators on Ducie are amazingly skilled too.  But the team use of DXA is simply fantastic, and allows one to confirm things right away.

 

 

Posted in DX | Leave a comment

Nice day with Scouts working satellites during JOTA

Posted on October 20, 2018 by Bob Beatty

Today was the sixth JOTA (Jamboree On The Air) that I’ve had the privilege of working at, along with other Newport County Radio Club members.  While the weather was dicy yesterday (poor scouts trying to sleep during some rather strong wind/rain storms), when I showed up around 10:30 this morning, there was nothing left but fluffy clouds.  Rob KC1ZZU and Willy W1LY, helped me to setup my satellite station shown in the photos below.  By noon we were on the air and worked about 30 stations during multiple passes of AO7, SO50, AO91, AO92, and CAS4B over the next five hours.  By 5 PM, with Willy & Rob’s help, the gear was stowed in my truck and I was headed home.  Jim KA1ZOU and his crew worked very hard and a large number of scouts obtained their Radio Merit Badge by the time the day drew to a close.

The RF end of the station: Icom IC910H, Portable Rotation AZ/EL controller, Toughbook running SATPC32

Antenna Magic — Arrow “Alaskan” Antenna mounted on two beams for 70cm and 2m vertical, with Portable Rotation AZ/EL rotor, mounted on a Pyle speaker stand.

The equipment in use is a fairly old Icon IC-910H (2m/70cm multimode radio), and a Panasonic Toughbook removed from police service running SATPC32.  The computer handles the Doppler corrections for the radio uplink and downlink, as well as tracking data for the antenna system.  A PortableRotation.com AZ/EL Rotor is used to steer two halves of an Arrow Antenna “Alaskan” antenna (one Alaskan antenna plus another boom — the antennas mounted vertically on each side of the rotor’s boom).  A 30 AH LiFePO4 BioennoPower battery provided the power for the radio and rotor.  The system worked flawlessly for ten satellite passes over 5 hours (the LiFePO4 battery had used about 1/4 of its capacity, and the laptop battery still had another hour left in it).

The antennas worked well from horizon to horizon and provide some rather long DX into the UK, Caribbean, and South America.  There were some very deep fades due to the simple vertical polarization on my end, but overall signal levels were excellent.  CAS4B in particular was quite lonely.  But AO7, launched 44 years ago in 1974 was VERY busy and stayed in Mode UV all day long.

 

Posted in AMSAT, AO-7, AO-91, AO-92, CAS-4B, IOTA, Satellite, SO-50 | 4 Comments

Errors in PortableRotation.com AZ/EL Manual

Posted on October 17, 2018 by robert

The Portable Rotation 12PRSAT AZ/EL Rotor is a pretty cool product, works well with SATPC32.  But there are several critical errors in the latest documentation (version 1.5).

To enter Magnetic Declination (14 degrees west in RI) do the following:

  1. Power unit ON with CW button held, and hold until “Config” screen shows
  2. On the Config screen (AC/SC/BR) press the MODE button to pick SC
  3. On the CalSensor screen (MD/Ex/PT) press the CCW button to pick MD
  4. Enter Magnetic Declination, with WEST entered as a negative number

To perform a calibration of the magnetic sensor, setup the tripod and antenna within +/- 30 degrees of North and +/- 10 degrees of level.  Then do the following:

  1. With power already ON
  2. Press all 3 buttons (CCW/MODE/CW) together, and hold until the version info shows on the screen
  3. On the GP/VO/AC screen, use the CW button to pick AC
  4. On the CM/RH/AC screen, use the CCW button to pick CM
Posted in Gear, Satellite | Leave a comment

License Renewed

Posted on October 2, 2018 by Bob Beatty

I guess I am good for another decade.  I was pleasantly surprised to find it VERY easy to renew online in the FCC ULS system.  Even more surprised that I could find my password, which I haven’t used in about a decade.  Funny that I’ve looked at this 2018 date as so far off in the future for many years, yet here it is.  Now I’m wondering what life will be like in 2028, and hoping I’m still around to enjoy it.  48 years in Amateur Radio and counting!

Posted in From the OM, History | Leave a comment

WB4SON.com now Secure

Posted on September 18, 2018 by Bob Beatty

I have completed the migration of WB4SON.com to a secured https:// system on HostGator.  So far working VERY well, and about 1/8 the cost of GoDaddy

Posted in From the OM | Leave a comment

WB4SON.COM Moved to HostGator

Posted on September 8, 2018 by robert

For the past seven years, WB4SON.COM has been hosted on GoDaddy.com, but with their ever increasing prices, plus costs for a security certificate, I was forced to move my hosting to HostGator.com, which uses a standard cPanel interface and gives me much more economical service (and security certificate options).

Hopefully HostGator will be as reliable as GoDaddy.

Posted in From the OM | Leave a comment